Im having a problem with a library I am using, it might be the library or it might be me using it wrong!
Basically when I do this (Timeout in milliseconds)
_ignitedHttp.setConnectionTimeout(1); // v short _ignitedHttp.setSocketTimeout(60000); // 60 seconds
No timeout exception is generated works ok, however, when I do this:
_ignitedHttp.setConnectionTimeout(60000); // 60 seconds _ignitedHttp.setSocketTimeout(1); // v short
I get a Socket Exception.
So my question is why can I not simulate a Connection Exception? Am I misunderstanding the difference between a socket and a connection time-out? The library is here (not officially realsed yet).
A connection timeout occurs only upon starting the TCP connection. This usually happens if the remote machine does not answer. This means that the server has been shut down, you used the wrong IP/DNS name or the network connection to the server is down.
A socket timeout is dedicated to monitor the continuous incoming data flow. If the data flow is interrupted for the specified timeout the connection is regarded as stalled/broken. Of course this only works with connections where data is received all the time.
By setting socket timeout to 1 this would require that every millisecond new data is received (assuming that you read the data block wise and the block is large enough)!
If only the incoming stream stalls for more than a millisecond you are running into a timeout.
A connection timeout is the maximum amount of time that the program is willing to wait to setup a connection to another process. You aren’t getting or posting any application data at this point, just establishing the connection, itself.
A socket timeout is the timeout when waiting for individual packets. It’s a common misconception that a socket timeout is the timeout to receive the full response. So if you have a socket timeout of 1 second, and a response comprised of 3 IP packets, where each response packet takes 0.9 seconds to arrive, for a total response time of 2.7 seconds, then there will be no timeout.