Home » Php » How to fix "Headers already sent" error in PHP

How to fix "Headers already sent" error in PHP

Posted by: admin February 25, 2020 Leave a comment


When running my script, I am getting several errors like this:

Warning: Cannot modify header information – headers already sent by (output started at /some/file.php:12) in /some/file.php on line 23

The lines mentioned in the error messages contain header() and setcookie() calls.

What could be the reason for this? And how to fix it?

How to&Answers:

No output before sending headers!

Functions that send/modify HTTP headers must be invoked before any output is made.
summary ⇊
Otherwise the call fails:

Warning: Cannot modify header information – headers already sent (output started at script:line)

Some functions modifying the HTTP header are:

Output can be:

  • Unintentional:

    • Whitespace before <?php or after ?>
    • The UTF-8 Byte Order Mark specifically
    • Previous error messages or notices
  • Intentional:

    • print, echo and other functions producing output
    • Raw <html> sections prior <?php code.

Why does it happen?

To understand why headers must be sent before output it’s necessary
to look at a typical HTTP
response. PHP scripts mainly generate HTML content, but also pass a
set of HTTP/CGI headers to the webserver:

HTTP/1.1 200 OK
Powered-By: PHP/5.3.7
Vary: Accept-Encoding
Content-Type: text/html; charset=utf-8

<html><head><title>PHP page output page</title></head>
<body><h1>Content</h1> <p>Some more output follows...</p>
and <a href="/"> <img src=internal-icon-delayed> </a>

The page/output always follows the headers. PHP has to pass the
headers to the webserver first. It can only do that once.
After the double linebreak it can nevermore amend them.

When PHP receives the first output (print, echo, <html>) it will
flush all collected headers. Afterwards it can send all the output
it wants. But sending further HTTP headers is impossible then.

How can you find out where the premature output occured?

The header() warning contains all relevant information to
locate the problem cause:

Warning: Cannot modify header information – headers already sent by
(output started at /www/usr2345/htdocs/auth.php:52) in
/www/usr2345/htdocs/index.php on line 100

Here “line 100” refers to the script where the header() invocation failed.

The “output started at” note within the parenthesis is more significant.
It denominates the source of previous output. In this example it’s auth.php
and line 52. That’s where you had to look for premature output.

Typical causes:

  1. Print, echo

    Intentional output from print and echo statements will terminate
    the opportunity to send HTTP headers. The application flow must
    be restructured to avoid that. Use functions
    and templating schemes. Ensure header() calls occur before messages
    are written out.

    Functions that produce output include

    • print, echo, printf, vprintf
    • trigger_error, ob_flush, ob_end_flush, var_dump, print_r
    • readfile, passthru, flush, imagepng, imagejpeg

    among others and user-defined functions.

  2. Raw HTML areas

    Unparsed HTML sections in a .php file are direct output as well.
    Script conditions that will trigger a header() call must be noted
    before any raw <html> blocks.

    <!DOCTYPE html>
        // Too late for headers already.

    Use a templating scheme to separate processing from output logic.

    • Place form processing code atop scripts.
    • Use temporary string variables to defer messages.
    • The actual output logic and intermixed HTML output should follow last.
  3. Whitespace before <?php for “script.php line 1” warnings

    If the warning refers to output in line 1, then it’s mostly
    leading whitespace, text or HTML before the opening <?php token.

    # There's a SINGLE space/newline before <? - Which already seals it.

    Similarly it can occur for appended scripts or script sections:


    PHP actually eats up a single linebreak after close tags. But it won’t
    compensate multiple newlines or tabs or spaces shifted into such gaps.

  4. UTF-8 BOM

    Linebreaks and spaces alone can be a problem. But there are also “invisible”
    character sequences which can cause this. Most famously the
    UTF-8 BOM (Byte-Order-Mark)
    which isn’t displayed by most text editors. It’s the byte sequence EF BB BF, which
    is optional and redundant for UTF-8 encoded documents. PHP however has to treat
    it as raw output. It may show up as the characters  in the output (if the client
    interprets the document as Latin-1) or similar “garbage”.

    In particular graphical editors and Java based IDEs are oblivious to its
    presence. They don’t visualize it (obliged by the Unicode standard).
    Most programmer and console editors however do:

    joes editor showing UTF-8 BOM placeholder, and MC editor a dot

    There it’s easy to recognize the problem early on. Other editors may identify
    its presence in a file/settings menu (Notepad++ on Windows can identify and
    remedy the problem),
    Another option to inspect the BOMs presence is resorting to an hexeditor.
    On *nix systems hexdump is usually available,
    if not a graphical variant which simplifies auditing these and other issues:

    beav hexeditor showing utf-8 bom

    An easy fix is to set the text editor to save files as “UTF-8 (no BOM)”
    or similar such nomenclature. Often newcomers otherwise resort to creating new
    files and just copy&pasting the previous code back in.

    Correction utilities

    There are also automated tools to examine and rewrite text files
    (sed/awk or recode).
    For PHP specifically there’s the phptags tag tidier.
    It rewrites close and open tags into long and short forms, but also easily
    fixes leading and trailing whitespace, Unicode and UTF-x BOM issues:

    phptags  --whitespace  *.php

    It’s sane to use on a whole include or project directory.

  5. Whitespace after ?>

    If the error source is mentioned as behind the
    closing ?>
    then this is where some whitespace or raw text got written out.
    The PHP end marker does not terminate script executation at this
    point. Any text/space characters after it will be written out as page content

    It’s commonly advised, in particular to newcomers, that trailing ?> PHP
    close tags should be omitted. This eschews a small portion of these cases.
    (Quite commonly include()d scripts are the culprit.)

  6. Error source mentioned as “Unknown on line 0”

    It’s typically a PHP extension or php.ini setting if no error source
    is concretized.

    • It’s occasionally the gzip stream encoding setting
      or the ob_gzhandler.
    • But it could also be any doubly loaded extension= module
      generating an implicit PHP startup/warning message.

  7. Preceding error messages

    If another PHP statement or expression causes a warning message or
    notice being printeded out, that also counts as premature output.

    In this case you need to eschew the error,
    delay the statement execution, or suppress the message with e.g.
    isset() or @()
    when either doesn’t obstruct debugging later on.

No error message

If you have error_reporting or display_errors disabled per php.ini,
then no warning will show up. But ignoring errors won’t make the problem go
away. Headers still can’t be sent after premature output.

So when header("Location: ...") redirects silently fail it’s very
advisable to probe for warnings. Reenable them with two simple commands
atop the invocation script:

ini_set("display_errors", 1);

Or set_error_handler("var_dump"); if all else fails.

Speaking of redirect headers, you should often use an idiom like
this for final code paths:

exit(header("Location: /finished.html"));

Preferrably even a utility function, which prints a user message
in case of header() failures.

Output buffering as workaround

PHPs output buffering
is a workaround to alleviate this issue. It often works reliably, but shouldn’t
substitute for proper application structuring and separating output from control
logic. Its actual purpose is minimizing chunked transfers to the webserver.

  1. The output_buffering=
    setting nevertheless can help.
    Configure it in the php.ini
    or via .htaccess
    or even .user.ini on
    modern FPM/FastCGI setups.
    Enabling it will allow PHP to buffer output instead of passing it to the webserver
    instantly. PHP thus can aggregate HTTP headers.

  2. It can likewise be engaged with a call to ob_start();
    atop the invocation script. Which however is less reliable for multiple reasons:

    • Even if <?php ob_start(); ?> starts the first script, whitespace or a
      BOM might get shuffled before, rendering it ineffective.

    • It can conceal whitespace for HTML output. But as soon as the application
      logic attempts to send binary content (a generated image for example),
      the buffered extraneous output becomes a problem. (Necessitating ob_clean()
      as furher workaround.)

    • The buffer is limited in size, and can easily overrun when left to defaults.
      And that’s not a rare occurence either, difficult to track down
      when it happens.

Both approaches therefore may become unreliable – in particular when switching between
development setups and/or production servers. Which is why output buffering is
widely considered just a crutch / strictly a workaround.

See also the basic usage example
in the manual, and for more pros and cons:

But it worked on the other server!?

If you didn’t get the headers warning before, then the output buffering
php.ini setting

has changed. It’s likely unconfigured on the current/new server.

Checking with headers_sent()

You can always use headers_sent() to probe if
it’s still possible to… send headers. Which is useful to conditionally print
an info or apply other fallback logic.

if (headers_sent()) {
    die("Redirect failed. Please click on this link: <a href=...>");
    exit(header("Location: /user.php"));

Useful fallback workarounds are:

  • HTML <meta> tag

    If your application is structurally hard to fix, then an easy (but
    somewhat unprofessional) way to allow redirects is injecting a HTML
    <meta> tag. A redirect can be achieved with:

     <meta http-equiv="Location" content="http://example.com/">

    Or with a short delay:

     <meta http-equiv="Refresh" content="2; url=../target.html">

    This leads to non-valid HTML when utilized past the <head> section.
    Most browsers still accept it.

  • JavaScript redirect

    As alternative a JavaScript redirect
    can be used for page redirects:

     <script> location.replace("target.html"); </script>

    While this is often more HTML compliant than the <meta> workaround,
    it incurs a reliance on JavaScript-capable clients.

Both approaches however make acceptable fallbacks when genuine HTTP header()
calls fail. Ideally you’d always combine this with a user-friendly message and
clickable link as last resort. (Which for instance is what the http_redirect()
PECL extension does.)

Why setcookie() and session_start() are also affected

Both setcookie() and session_start() need to send a Set-Cookie: HTTP header.
The same conditions therefore apply, and similar error messages will be generated
for premature output situations.

(Of course they’re furthermore affected by disabled cookies in the browser,
or even proxy issues. The session functionality obviously also depends on free
disk space and other php.ini settings, etc.)

Further links


This error message gets triggered when anything is sent before you send HTTP headers (with setcookie or header). Common reasons for outputting something before the HTTP headers are:

  • Accidental whitespace, often at the beginning or end of files, like this:

    // Note the space before "<?php"

       To avoid this, simply leave out the closing ?> – it’s not required anyways.

  • Byte order marks at the beginning of a php file. Examine your php files with a hex editor to find out whether that’s the case. They should start with the bytes 3F 3C. You can safely remove the BOM EF BB BF from the start of files.
  • Explicit output, such as calls to echo, printf, readfile, passthru, code before <? etc.
  • A warning outputted by php, if the display_errors php.ini property is set. Instead of crashing on a programmer mistake, php silently fixes the error and emits a warning. While you can modify the display_errors or error_reporting configurations, you should rather fix the problem.
    Common reasons are accesses to undefined elements of an array (such as $_POST['input'] without using empty or isset to test whether the input is set), or using an undefined constant instead of a string literal (as in $_POST[input], note the missing quotes).

Turning on output buffering should make the problem go away; all output after the call to ob_start is buffered in memory until you release the buffer, e.g. with ob_end_flush.

However, while output buffering avoids the issues, you should really determine why your application outputs an HTTP body before the HTTP header. That’d be like taking a phone call and discussing your day and the weather before telling the caller that he’s got the wrong number.


I got this error many times before, and I am certain all PHP programmer got this error at least once before.

Possible Solution 1

This error may have been caused by the blank spaces before the start of the file or after the end of the file.These blank spaces should not be here.


   echo "your code here";


Check all files associated with file that causes this error.

Note: Sometimes EDITOR(IDE) like gedit (a default linux editor) add one blank line on save file. This should not happen. If you are using Linux. you can use VI editor to remove space/lines after ?> at the end of the page.

Possible Solution 2:
If this is not your case, then use ob_start to output buffering:


  // code 


This will turn output buffering on and your headers will be created after the page is buffered.


Instead of the below line



echo("<script>location.href = '".ADMIN_URL."/index.php?msg=$msg';</script>");


?><script><?php echo("location.href = '".ADMIN_URL."/index.php?msg=$msg';");?></script><?php

It’ll definitely solve your problem.
I faced the same problem but I solved through writing header location in the above way.


You do

printf ("Hi %s,</br />", $name);

before setting the cookies, which isn’t allowed. You can’t send any output before the headers, not even a blank line.


It is because of this line:

printf ("Hi %s,</br />", $name);

You should not print/echo anything before sending the headers.



(copied from: source)


1) there should not be any output (i.e. echo.. or HTML codes) before the header(.......); command.

2) remove any white-space(or newline) before <?php and after ?> tags.

3) GOLDEN RULE! – check if that php file (and also, if you include other files) have UTF8 without BOM encoding (and not just UTF-8). That is problem in many cases (because UTF8 encoded file has something special character in the start of php file, which your text-editor doesnt show)!!!!!!!!!!!

4) After header(...); you must use exit;

5) always use 301 or 302 reference:

header("location: http://example.com",  true,  301 );  exit;

6) Turn on error reporting, and find the error. Your error may be caused by a function that is not working. When you turn on error reporting, you should always fix top-most error first. For example, it might be “Warning: date_default_timezone_get(): It is not safe to rely on the system’s timezone settings.” – then farther on down you may see “headers not sent” error. After fixing top-most (1st) error, re-load your page. If you still have errors, then again fix the top-most error.

7) If none of above helps, use JAVSCRIPT redirection(however, strongly non-recommended method), may be the last chance in custom cases…:

echo "<script type='text/javascript'>window.top.location='http://website.com/';</script>"; exit;


A simple tip: A simple space (or invisible special char) in your script, right before the very first <?php tag, can cause this !
Especially when you are working in a team and somebody is using a “weak” IDE or has messed around in the files with strange text editors.

I have seen these things 😉


Another bad practice can invoke this problem which is not stated yet.

See this code snippet:

include('a_important_file.php'); //really really really bad practise
header("Location:A location");

Things are okay,right?

What if “a_important_file.php” is this:

//some php code 
//another line of php code
//no line above is generating any output

 ----------This is the end of the an_important_file-------------------

This will not work? Why?Because already a new line is generated.

Now,though this is not a common scenario what if you are using a MVC framework which loads a lots of file before handover things to your controller? This is not an uncommon scenario. Be prepare for this.

From PSR-2 2.2 :

  • All PHP files MUST use the Unix LF (linefeed) line ending.
  • All PHP files MUST end with a single blank line.
  • The closing ?> tag MUST be omitted from files containing only php

Believe me , following thse standards can save you a hell lot of hours from your life 🙂


Sometimes when the dev process has both WIN work stations and LINUX systems (hosting) and in the code you do not see any output before the related line, it could be the formatting of the file and the lack of Unix LF (linefeed)
line ending.

What we usually do in order to quickly fix this, is rename the file and on the LINUX system create a new file instead of the renamed one, and then copy the content into that. Many times this solve the issue as some of the files that were created in WIN once moved to the hosting cause this issue.

This fix is an easy fix for sites we manage by FTP and sometimes can save our new team members some time.


Generally this error arise when we send header after echoing or printing. If this error arise on a specific page then make sure that page is not echoing anything before calling to start_session().

Example of Unpredictable Error:

 <?php //a white-space before <?php also send for output and arise error

//your page content

One more example:

includes 'functions.php';
?> <!-- This new line will also arise error -->

//your page content

Conclusion: Do not output any character before calling session_start() or header() functions not even a white-space or new-line